Veronte products

This section explains how to integrate MEX with Veronte products.

Autopilot 1x connection

Connector for MEX

Connector for Autopilot 1x - HEW.LM.368.XLNP (frontal view)

For proper operation, the connection between MEX and Autopilot 1x pins should be like this:

Autopilot 1x			MEX
PIN Nº	Signal	Color	PIN Nº	Signal
25	CANA_P	White-Black	22	CAN(A) P
26	CANA_N	Brown-Black	23	CAN(A) N
28	CANB_P	Yellow-Green	20	CAN(B) P
29	CANB_N	Pink-Green	21	CAN(B) N
30	GND	Yellow-Pink	24	CAN GND

Note

If only CAN A or CAN B has been configured in the software for communications, only the corresponding pins must be connected.

Important

Integration is also possible by connecting CAN A of the Autopilot 1x to CAN B of the MEX and vice versa, i.e. it does not necessarily have to be CAN A-CAN A or CAN B-CAN B.

However, any connections made must be consistent with the configuration made at software level in 1x PDI Builder and MEX PDI Builder.